Copyright © SEP AG 1999-2020. All rights reserved.

Philips Advance Xitanium outdoor LED drivers with SimpleSet technology 0-10V with SimpleSet are designed to give OEMs ultimate flexibility. With wide operating windows and simple programming, the drivers make it easy for luminaire manufacturers to design luminaires of different sizes and lumen levels for outdoor applications. LED Driver Xitanium. Company News, News & Events Comments Off on Upowertek 0.1% Dimming Slim Driver BSR Series UL Certified October 30, 2019, Upowertek announces that BSR series 20-80W LED driver has been certified with UL Class P. UL Class P certification enables this series to be fixed as a single product or as a part of a luminaire. In general: The Veritas nursing evaluation is aiming at helping organisations in mapping the risk areas and levels, for nursery jobs for people in helpless populations- babies, children, the elderly, people who need nursing care, people with disabilities, and so on.

Any form of reproduction of the contents or parts of this manual is allowed only with the express written permission from SEP AG. When compiling and designing user documentation SEP AG uses great diligence and attempts to deliver accurate and correct information. However, SEP AG cannot issue a guarantee for the contents of this manual.

• 6Configuring a SEP BSR Backup
• 10Troubleshooting

Introduction

To perform a Bare Metal backup additional Software must be installed on the Server system (Sesam BSR). After installation the configuration, scheduling of the backups and processing is performed centralized by the Sesam Server (via GUI). BSR backups only the system partition and Active Directory to grant a higher flexibility for DR restore. To perform a consistent disaster restore of Servers with active databases (like Exchange, SharePoint, MS-SQL e.g.) further steps are necessary, therefore also an statement from Cristie: http://support.cristie.com/cgi-bin/kb.cgi?do=read&id=127&lang=en

Steps to prepare a Windows Database-Server (Exchange, MS-SQL, SharePoint etc.) for a Disaster-Recovery:

1. BSR-Backup of the system partition
2. if applicable path-backup of further partitions without the databases
3. ONLINE backup of all databases with the corresponding backup modules

Drivers Bar In Overland Park

Therefore the restore has to be performed in this order:

1. BSR-Recovery of the system partition
2. Reboot
3. Restore of other partitions
4. Restore and recovery of the databases

System Requirements

Drivers Branch

• SEP sesam Server Version 4.0.1.23 or later
• SEP sesam Client Version 4.0.1.23 or later
• A fully functional DNS Server
• Before starting SEP BSR Windows you must perform a 'Driver Control' operation to determine required drivers for the recoverable system. This is described in the CBMR Driver validation section.

Installing the SEP sesam Client

• A fully installed and functional SEP sesam Client for Windows is required before using SEP BSR Windows extension. The installation package can be found here.

Installing SEP BSR

• Insert the SEP sesam BSR Disk into the CD drive of the system where the Disaster Recovery mode will be used.

The 'Installation Program' should start automatically. If the program does not start automatically please use the command:

Next, please select the required installation (i.e. Server or Desktop) and choose OK. Now select the full Installation along with Standard Configuration.

During the Installation you should not change any settings in the dialogue boxes. Also when the program prompts you for the User Account, this should be left empty.

• Answer the question after the start of the CBMR Schedulers with 'YES' and click Continue.
• The installation path can be set depending on your system environment. The installation will not require more than 30 MB of disk space.

• After the successful installation you must copy the license file data from SEP Software Inc. purchased license from the Basis Directory to SEP BSR, e.g. C:Program FilesCristieCBMR thus overwriting the demo license file.

• After the installation of SEP BSR you must start the CBMR program. Use either the Desktop symbol CBMR or the command: Start>Programme>Cristie>CBMR and confirm with OK. Then click on Configuration and open Backup Locations and close the program.

CBMR Driver validation

After the installation of SEP BSR it is absolutely necessary to systematically follow the next steps to insure an error-free restore of the system environment and backed up data.

Drivers Book Arkansas

This test should be carried out per server model. It takes about 5 minutes per system. (Preferred way)

1. Boot server with the latest BSR PE CD
2. Testing of network card and storage controller
   1. Storage Controller:
      1. Command Line to open by pressing ALT + S in the main menu
      2. Run Diskpart
      3. Run the diskpart prompt, type 'list disk'
      4. Now, when the existing disc is displayed, the Storage Controller supports the recovery
   2. Network card:
      1. On the Tools menu, go to 'Configure the network'
      2. There via DHCP or manually assign an IP
      3. Change to the still open command line and a 'ping' settle on another server on the network.
      4. If another server responds on the network, the Supported network card for recovery
3. If the Network tool cannot be opened or the hard disk not be detected, missing the temporary driver for the recovery on the BSR PE CD. This can be from the Tools menu and point 'Load a driver' will be loaded. The driver can be loaded for example by USB stick or from a network share. The current PE CD is based on the Vista SP1 x86 kernel and therefore should the temporary lack of drivers for Windows Server 2003 x86 be recharged. In some cases, a Windows Server 2008 x86 driver fit. If the drivers are loaded successfully could, the disc should be recognized or the network tool leave open. Please send us the driver reloaded at support@cristie.de, so we build it into the next version can.

An alternative way, run the included program Driver validation found in the directory Programmecristie, which was installed with the previous procedure.

In this screenshot several Hardware Components have been included under one Yellow Dot. The Yellow Dots indicate that drivers have been included in the BSR Boot-CD. In case of a Red Dot appears it is up to the system administrator to determine if the missing driver is required for a successful disaster recovery.If the 'Red Dot' indicates a Network I/F Card or a Disk/SATA/Raid Controller special action should be taken. If a Data Restore is performed without first testing the manual Driver Installation the restore is not covered under warranty or guaranteed. It is possible as in a normal Window's Installation using the Install CD to install these drivers using 'F6' during the bootup operation. To assure that this report has been technically verified, SEP offers the opportunity to create a logfile using the switch Create Driver Info. Attach the relevant customer information and date and label 'SEP AG' and forward it to support@cristie.de and copy 'CC' support@sepsoftware.com. Our partner Cristie will issue a technical statement regarding this event.

Configuring a SEP BSR Backup

As a starting point it is important to consider the following: The Backup is started as in every SEP sesam backup, on the Server. It can be included under a Group and in the scheduler (SEPuler) and can be performed within the standard backup routines.

Configuring a BSR Task using the SEP Sesam GUI

• Include the target backup client as O/S Type: Windows
• In the event the client lies within a fire walled DMZ you must select the necessary firewall option in the GUI
• Create a Test File Backup (e.g. from C:temp) to assure the validity of the client backup task
• Now, set up the SEP BSR task

Within the SEP sesam GUI under the Menu Tasks/Clients you must select SEP BSR Client and create a new task.

Disaster Recovery and Restore with SEP BSR

To begin the Disaster Recovery process the SEP BSR CD must be inserted and the server must be configured to boot from DVD/CD drive. After booting, the Welcome screen from Cristie will appear.

After the successful boot up procedure follow the subsequent directions.

• The Restore is started by clicking the 'Recovery Manager' Button.
• Skip the next Window by clicking 'next'.
• In the next menu (see Picture) you will need to select the backup location and configure it within the network>

• Using the Button 'Network setup' you will be able to set up the IP Configuration at 'IP Addresses'. In this location you will enter the IP Address of the recovered Server, this is used in the event there is no DHCP Server.

• If there is a DHCP Server, you should enter the correct host name and the subsequent set in the last section 'Network Identification' .

• If there is no DHCP Server all additional data should be entered correctly in these fields.
• All these Settings must be confirmed by selecting 'Apply' and checking 'OK' when prompted.
• After confirming all Network settings you will return to the next menu window. Select here the first choice 'Stored with the backup data'.
• Hit 'next' and in the next menu and 'SEP sesam Location'.
• Select 'next' and click 'create new' and enter the settings as they are in the next screenshot.

• Click 'OK' to verify input. With the newly created location and 'Next' you will come to the selection of the available SEP sesam backups.

• Select the desired backups continue by clicking 'Next'.

Now the BSR client will select 'SM_STPD' or 'System Information' prepared via the SEP sesam. Using this function allows the user to select all partitions required from within the chosen backup. With one right click on the partition in the window on the right you have the possibility to select a further option format or do not format. The disk size and partitions can be adapted also.

• If different hardware is used, the Plug and Play Manager detects this and asks in the next step for the appropriate path for the driver. If the drivers are on a network path, this path can be mounted via the Network Setup. If the drivers are just not yet available, this step can be skipped and be started manually after the restore.

• In the next step the chosen partitions will be formatted and prepared for restore to the server.

• After partitioning all data from the SEP sesam Server is transferred using the SEP sesam STPD Protocol to the BSR client (Disaster Recovery Target!).

• Close the status window after successful restore.

• The required Reboot may now be selected from the Main Menu.

In the event that a new activation of the operating systems is required it is possible that a hardware device has been changed.

If you have any restore issues or problems please contact us at support@sepsoftware.com

Additionally, if you have any problems with or recommendations for our documentation and procedures please report them to support@sepsoftware.com

Booting BSR with USB

Instructions to make a bootable USB stick for BSR
1 Open CMD and use diskpart on a Windows Vista or newer operating system.
a Select 'List Disk' to enter the number of the USB stick (example: 1)
b. Sel disk 1 (number of USB stick) (Disc 1) Select
c. Clean (disk clean up)
d create par primary (primary partition on disk 1 create)
e sel par 1 (partition 1) Select
f act (as Active)
g format fs = fat32 (format partition to FAT32 )
h Assign (to assign a drive letter, happens automatically)
i Exit (Exit)
2 XCopy
a extract the BSR ISO file to a temporary folder, for example C: BSR
b. xcopy C: BSR *.* F:*.* /s (example: When BSR/WINPE installation files are in C:BSR and the purified bootable flash drive is the drive letter F:)

Known Issues

• Backup to media pool with more than 15 characters does not work. This issue is related to Cristie and we're waiting for a solution of Cristie (created Nov 12 2013).

Troubleshooting

Starting a CMD for debugging purposes

While being in the BSR Live CD Main Menu it is possible to start a command Line box using the keycombination 'ALT'+'S'. It allows you to check your network configuration by using the proper toolslike ping or nslookup.

Currently unsupported hardware

• Systems with UEFI 'Bios'

Error Codes

This Error appears if no Cristie licence is inserted.

Error Codes

• A BSR Backup stops with the following error message

Error: Operation failed:

Solution:

--> source the sesam profile on the SEP sesam Server and type in the following command

Further Links/Literature

Friday at the Track (FATT)℠ is a performance driving event for drivers of all skill levels from the beginner to the experienced track day participant. This instructional event allows you to bring your street or track prepared car out for a day at the track and enjoy going fast without the fear of red and blue lights in your rear-view mirror. For a whole lot less than the cost of a speeding ticket, you receive classroom instruction (Novice and Intermediate drivers), skid pad instruction in our cars (including front and rear skid management), and four sessions on track in your own car with in-car instruction for Novice and Intermediate drivers, or Solo for Advanced drivers. It is a chance to go fast and have fun in a controlled environment.

Drift Nirvana℠Drift Nirvana℠ Have you ever wanted to try drifting? Do you want to gain valuable skills to improve your drift technique? Here’s your opportunity to drift at beginner to advanced level race tracks. Drift Nirvana℠ is open to new through experienced drifters.

Open Practiceisfor competition licensed drivers and cars. This event precedes SCCA race weekends and is available for any road racing car prepared in accordance with the rules of SCCA, PCA, SVRA, or HSR or other sanctioning bodies. “Open Passing” is permitted, however mock racing or overly aggressive driving is not permitted. Requires current competition license to participate.

Seat Time is for experienced, solo qualified performance driving enthusiasts. Participants must be certified as “Solo” through FATT℠, other equivalent performance driver education events, or possess a current competition license. Street cars must meet FATT℠ requirements. Competition-prepared cars must meet open practice specifications. “Open wheel” race cars are not permitted at Seat Time events.

The Jefferson 500 has grown into one of the largest and most respected vintage races in the northeast. In 2009 Bill Scott Racing and the Vintage Racers Group partnered bring the Jefferson 500 back to the Summit Point℠ Motorsports Park. This annual event brings over 200 cars a year to Summit Point, WV for three days of racing, a test day and a driver’s school.

Accident Avoidance“Drivers ed” teaches beginners how to drive. BSR’s Accident Avoidance training teaches already-licensed drivers how to handle highway emergencies. So trained, Accident Avoidance graduates will have the opportunity to respond instantaneously and more positively to any driving emergency. The difference can save lives.

BSR (BSR Training) is the recognized leader in vehicle anti-terrorist and criminal activity training for Military and Governmental applications worldwide. With 30 years of experience, BSR understands terrorism and criminal activity related to vehicular matters and has developed a conceptual base for responses that is state-of-the-art.